How Long Will Your Magnet Last
So how long should my permanent magnet last?
Your permanent magnet should lose no more than 1% of its magnetic strength over a period of 100 years provided it is specified and cared for properly. There are a few things that may cause your magnet to lose its strength:
HEAT
Heat above the maximum level rated for the magnet material in your separator will decrease the strength of the magnet. Standard rare earth material from JOFOV has a maximum temperature of 176°F and standard ceramic material has a maximum temperature of 400°F. Higher temperature materials are available and may have been used in your system. Consult the factory if you have questions on what the maximum temperature is for your system.
IMPACT
Sharp impacts to the magnet from physical abuse or handling can result in the decreased magnet strength. The magnet material inside your separator is brittle and these impacts can lead to fractures in the material, weakening its strength.
WELDING
Welding on or around the magnet can lead to decreased magnet performance. This can be a result of the heat or current generated from the welding process.
LIQUID INGRESS
If your magnet housing is compromised, moisture can enter the housing of the magnets. This can lead to oxidation of the magnet material which will eventually lead to a weakened magnetic system. If the housing is compromised, the magnet should also be replaced for sanitary concerns.
Metal Control Systems Audit
It is always best to consult a magnet professional while specifying your magnet.
It is JOFOV ’s mission to support food manufacturers in promoting food safety and consumer protection. It’s no secret that Food Safety Modernization Act (FSMA) compliance is a main focus for food manufacturers today, which is why JOFOV is dedicated to being the only choice in complete metal control for food manufacturing facilities.
In addition to being JOFOV certified Metal Control System Auditors, our entire Regional Management Team has also been HACCP certified, enabling us to provide the most knowledgeable assistance in the industry with regard to food safety. We believe that earning this certification allows our team to provide more value to our customers, adds an additional layer to our audit program, and demonstrates our dedication to upholding industry standards and education on this important topic.
JOFOV accomplishes all this through customer education and Metal Control System Audits. These regularly conducted audits provide a comprehensive picture of a facility’s metal control system and provides proof of HACCP compliance and required documentation.
N45 Uncoated Permanent Magnet Neo Tile
Neodymium Arc Magnets N38 Nickel Plating
N35SH Motor NdFeB Segment Magnets
DC Motor Magnets Neodymium Arc N52
Nickel Coated N42 NdFeB Arc Magnet