Product Description
Ø38mm NdFeB Anisotropic Cup Magnet with Countersink Bore / Counterbore, Cap Neodimium Disc Countersunk, Flat Pot Magnets with Countersunk Borehole Mounting, Rare Earth Neodymium Magnet in Steelpot with Countersunk Hole, Countersunk (Countersink) Ndfeb Pot Magnets, holding clamping mounting Magnets, Magnetic System w/ countersunk head screw, Plain Magnets China Supplier
Ø38mm NdFeB Anisotropic Cup Magnet with Countersink Bore / Counterbore Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSA38 / CSA38
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: with Countersunk Borehole Mounting / with Countersunk hole / with Countersink borehole / Disc with Countersunk hole (90° sunken hole)
Pot Magnet Size:
| Voice | Name | Symbol | SI | CGS |
|---|---|---|---|---|
| Shape | Diameter | D | 38.1 mm | 3.81 cm |
| diameter | d | 30 mm | 3 cm | |
| Internal diameter | ID | 6.5 mm | 0.65 cm | |
| Supplementation | S | 13 mm | 1.3 cm | |
| Height | H | 9 mm | 0.9 cm | |
| height | h | 6.8 mm | 0.68 cm | |
| Thickness | T | 2 mm | 0.2 cm | |
| Screw | M | 6 mm | 0.6 cm | |
| direction of magnetization | M | A | ||
| Weight | Net | 0.06469 kg | 64.69 g | |
| Surface treatment | Ni | 12 μm | ||
| Magnetic Characteristics |
Surface magnetic flux density | B | mT | Gauss |
| Suction force Adhesion |
F | 55 kgf | 55000 gf | |
| Magnetic flux density on load point | Bd | mT | Gauss | |
| Total flux | φo | Wb | Mx | |
| Permeance Coefficient | Pc | Pc | ||
| Maximum usage temperature | Tw | 80 ℃ | ||
| Minimum usage temperature | Tw | ℃ | ||
| Material properties | Materialsymbols | Pot Cap Neodymium | 35 | |
| remanence | Br | 1170-1220 mT | 11.7-12.2 kG | |
| Coercivity | Hcb | ≧868 kA/m | kOe | |
| Intrinsic coercive force | Hcj | ≧955 kA/m | kOe | |
| Maximum energy product | BH | 263-287 kj/m3 | MGOe | |
| Temperature coefficient | Br | -0.12 %/℃ | ||
| Hcj | -0.55 %/℃ | |||
| Heat resistant temperature | Tw | ≦80 ℃ | ||
| Curie temperature | Tc | 310 ℃ | ||
| Density | ρ | 7.5 kg/m3 | ||
| Remarks | REACH RoHS Directive | |||
By using a countersunk head screw, users can easily screw the pot magnet onto places where they want to hang, for example, tools, small iron parts etc. The openness of the countersunk can be changed to match the size of screw head.Produced with bore and countersunkExcello Pot magnets with bore / countersunk produced with strong neodymium magnet. Magnet is safely enclosed in the metal pot and the cylinder bore facilitates the mounting. This pot magnet is primarily used as professional holding function within the industrial area. Ø42mm NdFeB Flat Pot Magnets with Bore and Counterbore
Countersunk magnets are available with either pole on the magnetic face so that they can be used as a pair to attract or repel. If you are using two magnets to attract you need to make sure the opposite poles are facing each other as identical poles will repel! This magnet in a steel pot has a countersunk borehole and can be fastened with a countersunk screw. Ø48mm Neodymium Flat Pot Magnets with Counterbore
Different alloys influence the magnetic force because of the permeability of the alloyed material; The higher the carbon content of the alloy components, the smaller the magnetic attraction force.
When the roughness of the surface of the workpiece increases. Neodymium Magnetic Systems with Steel Shell and Internal Thread
An air gap and non-magnetic material between magnet and workpiece.
Through exposure to prolonged radioactive and gamma radiation.
