Cup Mounting Round Base Magnet w/ Hole Φ10mm, NdFeB Magnets in Steelpot, Cap Magnets with Borehole, Neodymium Screw-on Pot Magnet, Through hole magnetic system, Mounting Shallow Pot Magnets with Cylinder Bore, Neo Cup Permanent Magnets, Neodymium Holding Fixing Clamping Magnets, magnetic lenses magnetic assembly China Manufacturer
Cup Mounting Round Base Magnet w/ Hole Φ10mm Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSB10 / CSB10
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Through hole / with hole / with cylindrical hole / with borehole / screw-on / step hole / Counterboreds
Pot Magnet Size:
|Shape||Diameter||D||10 mm||1 cm|
|diameter||d||8 mm||0.8 cm|
|Internal diameter||ID||2.5 mm||0.25 cm|
|Supplementation||S||4 mm||0.4 cm|
|Height||H||5 mm||0.5 cm|
|height||h||4 mm||0.4 cm|
|Thickness||T||1 mm||0.1 cm|
|Screw||M||2 mm||0.2 cm|
|direction of magnetization||M||A|
|Weight||Net||0.00285 kg||2.85 g|
|Surface treatment||Ni||12 μm|
|Surface magnetic flux density||B||mT||Gauss|
|F||2 kgf||2000 gf|
|Magnetic flux density on load point||Bd||mT||Gauss|
|Maximum usage temperature||Tw||80 ℃|
|Minimum usage temperature||Tw||℃|
|Material properties||Materialsymbols||Pot Cap Neodymium||35|
|remanence||Br||1170-1220 mT||11.7-12.2 kG|
|Intrinsic coercive force||Hcj||≧955 kA/m||kOe|
|Maximum energy product||BH||263-287 kj/m3||MGOe|
|Temperature coefficient||Br||-0.12 %/℃|
|Heat resistant temperature||Tw||≦80 ℃|
|Curie temperature||Tc||310 ℃|
|Remarks||REACH RoHS Directive|
An advantage of this design is that the fixing is done by clamping onto the steelwork rather than the magnet, allowing higher then normal tightening to be possible to ensure maximum secureness of fitting (such high clamping forces directly on magnets could break the magnets).
The Pot Magnet with Through Hole Mounting has a good depth of field which enables the larger magnets to be used as a retrieval magnet. The Pot Magnet with Through Hole Mounting is ideal for use in heavy duty or industrial fixing applications.
The Pot Magnet with Through Hole Mounting also exists in a rubber coating version to provide additional friction to minimise sliding along a surface.
Pot Magnet with Through Hole Mounting is available in sizes from 25mm to 100mm diameter with pull forces ranging from 8kg up to 68kg. The holes could take M5, M6, M8 and M10 threads. The inner diameter of the ring magnet is much larger than the hole in the steel casing allowing the head of the bolt or screw to easily fit in place.
The Pot Magnet with Through Hole Mounting has a maximum operating temperature of +180 deg C with ferrite and +80 deg C with NdFeB. Holding Shallow NdFeB Cup Magnet with Borehole Φ12mm
We can produce other Pot Magnets with Through Hole Mounting to customer specifications subject to a possible minimum order quantity – please contact us for a copy of our extended range of Pot Magnets, containing versions that we can produce as standard (subject to minimum order quantities).