Mounting NdFeB Plain Pot Magnets D70mm, Neodymium Pot Magnet with No Bore, Neodymium Disc Magnets With Steel Pot, NdFeB Glue-in pot Magnets, Flat Neodymium Gripper, Flat Mounting Magnet or NdFeB Flat Cup Magnets, magnetic lens, mounting magnet, ndfeb flat pot, NdFeB magnets in steelpot Supplier
Mounting NdFeB Plain Pot Magnets D70mm Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSO70 / CSO70
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Flat / Plain / with no bore
Pot Magnet Size:
Pot Total Diameter (D): 70 mm
Pot Total Height (H): 16.9 mm
Tolerance: ±0.1 mm
Weight: 476 g
Holding Force: 153 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
– Magnet is encapsulated on all but one side with a protective steel holding pot.
– Incorporates flathead steel and a disc magnet.
– Powerful Rare Earth (Neodymium) permanent magnet.
– High gloss Nickel coating, for protection against corrosion.
– Maximum operating temperature 80°C / 100°C
Neodymium pot magnet with no bore uses neodymium magnet to attract on the flat surface to fix the objects. It can be used as magnetic button in the office to fix the paper or map on the white board, or other industrial applications.
Neodymium (NdFeB ) Pot Magnets
NdFeB Pot Magnets are best for small sized magnetic products with maximum pull strength (ideally when in direct contact with ferromagnetic e.g. mild steel surfaces). The actual pull force achieved is dependent on the surface that is being clamped onto (material type, thickness, flatness, friction levels, etc), its quality (e.g. rust free), its size (thickness plus total surface area), etc. Large NdFeB Flat Pot Magnet D80mm
We offer Pot Magnets in a silver (chrome, zinc or nickel) finish, a white paint finish, a red paint finish, black rubber coated finish and ferritic stainless steel finish, etc. Large Neodymium Pot Magnet with No Bore D75mm
These NdFeB pot magnets are often glued at places where holding is needed, but screw is not wanted for the protection of the surface.
PLAIN POT MAGNETS
Standard Pull Force ≤12kg, ≤20kg, ≤30kg
Standard Ø 20mm, 25mm, 32mm
Standard Thickness 6mm or 8mm