Neodymium Cap Pot Magnet with Cylindrical Borehole D60mm, Through Hole Mounting Neodymium Screw-on Pot Magnets, NdFeB Pot Magnets with Cylindrical Borehole, Neo Cup Permanent Magnets, Neodymium Holding Claping Magnets with Hole, NdFeB Cap Magnets with Borehole magnetic assembly China Supplier
Neodymium Cap Pot Magnet with Cylindrical Borehole D60mm Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSB60 / CSB60
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Through hole / with hole / with cylindrical hole / with borehole / screw-on / step hole / Counterboreds
Pot Magnet Size:
|Shape||Diameter||D||60 mm||6 cm|
|diameter||d||50 mm||5 cm|
|Internal diameter||ID||8.5 mm||0.85 cm|
|Supplementation||S||15 mm||1.5 cm|
|Height||H||15 mm||1.5 cm|
|height||h||11.8 mm||1.18 cm|
|Thickness||T||3 mm||0.3 cm|
|Screw||M||8 mm||0.8 cm|
|direction of magnetization||M||A|
|Weight||Net||0.28652 kg||286.52 g|
|Surface treatment||Ni||12 μm|
|Surface magnetic flux density||B||mT||Gauss|
|F||95 kgf||95000 gf|
|Magnetic flux density on load point||Bd||mT||Gauss|
|Maximum usage temperature||Tw||80 ℃|
|Minimum usage temperature||Tw||℃|
|Material properties||Materialsymbols||Pot Cap Neodymium||35|
|remanence||Br||1170-1220 mT||11.7-12.2 kG|
|Intrinsic coercive force||Hcj||≧955 kA/m||kOe|
|Maximum energy product||BH||263-287 kj/m3||MGOe|
|Temperature coefficient||Br||-0.12 %/℃|
|Heat resistant temperature||Tw||≦80 ℃|
|Curie temperature||Tc||310 ℃|
|Remarks||REACH RoHS Directive|
Material: Housing steel and Magnetic core sintered neodymium ring magnet.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow flat pot magnets with cylindrical hole. These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=60 version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C. Large Neodymium Pot Magnet with Borehole D75mm
Cylindrical Hole Neodymium Pot Magnets or Through Hole Neodymium Cup Magnets – Our strong ring neodymium magnets with cylindrical hole could be even stronger! In this category you find our neo pot magnets with hole. The holding core is a strong ndfeb magnet with borehole (Powerful rare earth neodymium permanent magnet) built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. These magnets dimension is D 10mm to 80mm dia, the H is 4.5mm to 19mm. These magnetic pots weight is 2g to 641g and The pot coating is Ni-Cu-Ni plating, Zn-plated or Chrome-coated for a durable, quality finish. We offer an extensive holding force range of magnetic lenses with cylindrical hole is lifting up 1kg to lifting up 192kg, it is super strong powerful for mounting and holding. These are the ideal magnets for when intense holding power is required.
Different Holding Magnets, such as square, disc and ring holding magnets, hard Ferrite (ceramic), AlNiCo, NdFeB and SmCo assemblies are specified for many applications to all industries and engineering. These magnets are made by setting ferrite. A holding magnet has a particular magnetic circuit that can concentrate or insulate magnetic power at a target space around the magnetic assembly.