Product Description
Neodymium Threaded Pot With Eyelet 50mm Magnet, NdFeB Eyebolt Pot Magnets, Recovery Eye Bolt Pot Magnet, Galvanised Steel Neodymium Eyelet Hook Magnets, Powerful Neo Pot Magnets with Eyebolt (loop, eyelet, eye), Eyebolt Neodymium Magnet, Ring Eyemagnet, Clamping NdFeB Cup Magnet with Eyelet or Eyelet Mounting Pot Magnet China Supplier
Neodymium Threaded Pot With Eyelet 50mm Magnet Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSF50 / CSF50
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Internal Threaded Stud with Eyelet
Pot Magnet Size:
Pot Total Diameter (D): 50 mm
Pot Magnet Diameter (D1): 12 mm
Pot Height (h): 10.7 mm
Total Height without Eyelet (H): 25.6 mm
Total Height with Eyelet (H1): 62.6 mm
Thread M: M8
Consolidation: Srewing
Tolerance: ±0.1 mm
Weight: 173 g
Holding Force: 91 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
Either pot magnet or cup magnets it is named after its shape and they both refer to the same group of magnetic products. By gluing a round shape magnet into a steel pot/cup you get a prototype pot magnet and based on that prototype there are so many extensions being made by adding different accessories, using different shape components. Some of them could look so different from the prototype pot magnet but as far as their core working principle does not change, we still call them “pot magnet”. With the emerge of extension products other names are also used such as: round base magnet, hook magnet, etc.
High-quality material: Eyebolt (loop, eyelet, eye) & pot made of galvanised steel with integrated neodymium magnets NdFeB (neodymium-iron-boron alloy); magnetisation N45, adhesive force / holding force 120 kg. Specification of the adhesive force when mounted on the ceiling (horizontal) with pull down on the optimal surface (e.g. thick steel or iron plate). When attached to a wall (vertical), the adhesive force of the pot magnet with loop is lower when pulled down due to the physics.
Features of eyelet magnets
Principle: The strong neodymium magnets are embedded in a steel pot. The steel pot increases the adhesive force of the magnet on direct contact with a thick iron surface. If there is no direct contact with the counterpart, or if the steel plate is thin, painted or rough, you can strain it much less. Clamping Neodimium Eyelet Pot Magnet 55mm
Shear force: The indicated adhesive force was measured perpendicular to the surface to which the magnet should stick. It takes a lot less strength to move the magnet sideways. Therefore, you can strain a pot magnet much less if you use it on a wall as opposed to using it on the ceiling.
Rust: These magnets are not rust-proof and therefore intended for dry indoor use.