Product Description
Pot Cap Neodymium Magnets Φ16mmX5mm w/ M4 Internal Thread S-pole, Shallow Pot Magnet with Internal Thread, holding clamping magnets, magnetic mounting solution of fixtures, Magnetic Fastening Device System NdFeB w/ Screw Hole center nuts, Neodymium cup magnets with continuous inner thread, Neodymium Female Threaded Pot Magnets, Plain Magnets China Supplier Manufacturer
Pot Cap Neodymium Magnets Φ16mmX5mm w/ M4 Internal Thread S-pole Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSH16 / CSH16
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: with Thread Mounting / with Internal Thread / with Threaded Hole / with Female Threaded, Inner Thread
Pot Magnet Size:
Voice | Name | Symbol | SI | CGS |
---|---|---|---|---|
Shape | Diameter | D | 16 mm | 1.6 cm |
diameter | d | 13 mm | 1.3 cm | |
Internal diameter | ID | 6 mm | 0.6 cm | |
internal diameter | id | 6 mm | 0.6 cm | |
Height | H | 5 mm | 0.5 cm | |
height | h | 3.3 mm | 0.33 cm | |
Thickness | T | 1.5 mm | 0.15 cm | |
Screw | M | 4 mm | 0.4 cm | |
direction of magnetization | M | A | ||
Weight | Net | 0.00683 kg | 6.83 g | |
Surface treatment | Ni | 12 μm | ||
Magnetic Characteristics |
Surface magnetic flux density | B | mT | Gauss |
Suction force Adhesion |
F | 4 kgf | 4000 gf | |
Magnetic flux density on load point | Bd | mT | Gauss | |
Total flux | φo | Wb | Mx | |
Permeance Coefficient | Pc | Pc | ||
Maximum usage temperature | Tw | 80 ℃ | ||
Minimum usage temperature | Tw | ℃ | ||
Material properties | Materialsymbols | Pot Cap Neodymium | 35 | |
remanence | Br | 1170-1220 mT | 11.7-12.2 kG | |
Coercivity | Hcb | ≧868 kA/m | kOe | |
Intrinsic coercive force | Hcj | ≧955 kA/m | kOe | |
Maximum energy product | BH | 263-287 kj/m3 | MGOe | |
Temperature coefficient | Br | -0.12 %/℃ | ||
Hcj | -0.55 %/℃ | |||
Heat resistant temperature | Tw | ≦80 ℃ | ||
Curie temperature | Tc | 310 ℃ | ||
Density | ρ | 7.5 kg/m3 | ||
Remarks | REACH RoHS Directive |
These pot magnets with screw holes feature threaded holes that enable users to fasten them on walls, wood boards, etc for holding tools. NdFeB(neodymium) magnet is used for the strong force. Neodymium shallow pot magnets with internal thread have a zinc body and a threaded stem.
The magnets can be used together with every kind of threaded/tapped screw.
Neodymium Pot Magnet – Internal Thread
These magnets have a female thread hole,can for M3,M4,M5,M6,M8 M10 or customized.They need to fastened with an male thread.As the metal pot to change the magnetic flux to make the force become strong,so even with a small size,but the force is very strong.They are suitable for strong and quickly removable fasten no need drilling.They widely use for trade fair,any shop build or other purpose.No matter use in private household or commercial or hobby applications are all suitable. Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish. Internal Thread Magnetic Flat Pot Device Neo Ø20x8mm
We really measure the tear-off force – no approximate calculations are used.
The uses of flat steel housed pot/cup magnets with threaded mounting hole:
The flat steel housed neodymium magnets with threaded mounting hole can be used for magnetic clamping of ceiling, signs, banners, Holding Mounting Neo Pot Magnet with Screw Hole
The magnetic pull force was measured on a 10 mm thick polished steel plate at room temperature. In special cases, the maximum deviation may be – 10%. Generally, it usually exceeds the value. Small scratches and breakage in the magnetic material do not affect the pull force of the whole flat neodymium cup magnet. Depending on the type of application (installation, temperature, thickness of the object being sucked), the pull force is greatly affected. So the force value is only for reference, not as a standard to measure the quality of a flat neodymium pot magnets.
In addition to standard sizes, we also offer custom solutions for flat neodymium cup magnets with threaded through mounting hole.