Product Description
Pot NdFeB Magnet with Cylinder Borehole Φ16mm, NdFeB Magnets in Steelpot, Cap Magnets with Borehole, Neodymium Screw-on Pot Magnet, Through hole magnetic system, Mounting Shallow Pot Magnets, Round Base Magnets with Cylinder Bore, Neo Cup Permanent Magnets, Neodymium Holding Fixing Clamping Magnets, magnetic lenses magnetic assembly China Supplier
Pot NdFeB Magnet with Cylinder Borehole Φ16mm Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSB16 / CSB16
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Through hole / with hole / with cylindrical hole / with borehole / screw-on / step hole / Counterboreds
Pot Magnet Size:
Voice | Name | Symbol | SI | CGS |
---|---|---|---|---|
Shape | Diameter | D | 16 mm | 1.6 cm |
diameter | d | 13 mm | 1.3 cm | |
Internal diameter | ID | 3.5 mm | 0.35 cm | |
Supplementation | S | 6.5 mm | 0.65 cm | |
Height | H | 5 mm | 0.5 cm | |
height | h | 3.3 mm | 0.33 cm | |
Thickness | T | 1.5 mm | 0.15 cm | |
Screw | M | 3 mm | 0.3 cm | |
direction of magnetization | M | A | ||
Weight | Net | 0.00724 kg | 7.24 g | |
Surface treatment | Ni | 12 μm | ||
Magnetic Characteristics |
Surface magnetic flux density | B | mT | Gauss |
Suction force Adhesion |
F | 4.5 kgf | 4500 gf | |
Magnetic flux density on load point | Bd | mT | Gauss | |
Total flux | φo | Wb | Mx | |
Permeance Coefficient | Pc | Pc | ||
Maximum usage temperature | Tw | 80 ℃ | ||
Minimum usage temperature | Tw | ℃ | ||
Material properties | Materialsymbols | Pot Cap Neodymium | 35 | |
remanence | Br | 1170-1220 mT | 11.7-12.2 kG | |
Coercivity | Hcb | ≧868 kA/m | kOe | |
Intrinsic coercive force | Hcj | ≧955 kA/m | kOe | |
Maximum energy product | BH | 263-287 kj/m3 | MGOe | |
Temperature coefficient | Br | -0.12 %/℃ | ||
Hcj | -0.55 %/℃ | |||
Heat resistant temperature | Tw | ≦80 ℃ | ||
Curie temperature | Tc | 310 ℃ | ||
Density | ρ | 7.5 kg/m3 |
An advantage of this design is that the fixing is done by clamping onto the steelwork rather than the magnet, allowing higher then normal tightening to be possible to ensure maximum secureness of fitting (such high clamping forces directly on magnets could break the magnets).Pot Magnet with Through Hole Mounting is available in sizes from 8mm to 150mm diameter with pull forces ranging from 0.5kg up to 500kg. The holes could take M3,M4 M5, M6, M8 and M10 threads. The inner diameter of the ring magnet is much larger than the hole in the steel casing allowing the head of the bolt or screw to easily fit in place.The Mounting Magnet with Through Hole Mount contains a ferrite or NdFeB ring magnet within a steel casing. The steel casing is plated to give high corrosion resistance. The steel casing has a hole in it to allow the Pot Magnet with Through Hole Mounting to be easily fixed into position with a cap screw or a bolt into the boss. The design is extremely robust.
The Pot Magnet with Through Hole Mounting has a good depth of field which enables the larger magnets to be used as a retrieval magnet. The Pot Magnet with Through Hole Mounting is ideal for use in heavy duty or industrial fixing applications. Neodymium Pot Magnet with Cylinder Bore Φ20mm
The Pot Magnet with Through Hole Mounting also exists in a rubber coating version to provide additional friction to minimise sliding along a surface.
NdFeB Hole Pot Magnets are best for small sized magnetic products with maximum pull strength (ideally when in direct contact with ferromagnetic e.g. mild steel surfaces). The actual pull force achieved is dependent on the surface that is being clamped onto (material type, thickness, flatness, friction levels, etc), its quality (e.g. rust free), its size (thickness plus total surface area), etc.
We offer Pot Magnets in a silver (chrome, zinc or nickel) finish, a white paint finish, a red paint finish, black rubber coated finish and ferritic stainless steel finish, etc.