Small Neodymium Glued Pot Magnet D10mm, Powerful Shallow Pot Magnet without Bore, Neodymium Plain Magnets With Steel Pot, NdFeB Glue-in pot Magnets, Flat Gripping Neodymium Gripper, Mounting Magnets, magnetic lens, Clamping holding permanent magnet, NdFeB magnets in steelpot, notice board magnet, refrigerator fridge whiteboard magnets China factory
Small Neodymium Glued Pot Magnet D10mm Parameter:
Material: Neodymium (NdFeB ) and Steel
Part No.: JFM-NSO10 / CSO10
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Flat / Plain / Glue-in / with no bore
Pot Magnet Size:
Pot Total Diameter (D): 10 mm
Pot Total Height (H): 5 mm
Tolerance: ±0.1 mm
Weight: 4 g
Holding Force: 1.5 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
1, Flat pot magnets are low profile for applications where height is limited.
2, They have a clearance hole through and a countersunk on the magnetic face to accept a countersunk screw.
3, The range of Shallow Pot Magnets is wide and shallow, the north and south poles are on the same plane.
4, Because the gap between the poles is narrow, they have a shallow flux field, these magnets are ideal for limpet type gripping applications.
5, Each magnet in the range is manufactured with a standard M6 thread for building into jigs and fixtures, fitted with a J bolt.
6, Surface can be red painted, or coated with nickel, zinc or Chrome. Disc holding magnets can be fixed onto or sunken into steel surfaces without any loss of performance. Flat Neodymium Cup Magnet without Bore
Diameter of flat pot magnet 6mm and 125mm
The diameter refers to the distance between the two widest points of the stud pot magnet. It ranges from 6mm (0.23″) to 125mm (4.9″).
The diameter you choose will depend on where the stud pot magnet is going to be used.
For example, if the magnet is going to be used for promotional ceiling signs or light fittings, the diameter should be larger, as the magnet needs greater contact with the ferromagnetic material to provide a secure hold.
Depth of pot magnet 4.5 mm and 70mm
The depth of a stud pot magnet is the distance from the top of the stud to the magnetic face, and can range from 5mm (0.2″) to 70mm (2.8″). Handy Neodymium Fridge Pot Magnet Ø12mm
The depth you choose will depend on the amount of space available for the stud pot magnet. If there is a limited height available, then a magnet with a depth of less than 20mm (0.79″) would be ideal.
Magnetic pull of stud pot magnet 0.8kg and 164kg
The magnetic pull of stud pot magnets ranges from 0.8kg (1.8lbs) to 164kg (361.56lbs).