Product Description

Tiny Flat Plain Neodymium Magnet in Steelpot D6mm, Powerful Shallow Pot Magnet without Bore, Neodymium Plain Magnets With Steel Pot, NdFeB Glue-in pot Magnets, Flat Gripping Neodymium Gripper, Mounting Magnets, magnetic lens, Clamping holding permanent magnet, NdFeB magnets in steelpot, notice board magnet, refrigerator fridge whiteboard magnets China factory

Tiny Flat Plain Neodymium Magnet in Steelpot D6mm Parameter:
Material:  Neodymium (NdFeB ) and Steel
Part No.:             JFM-NSO6 / CSO6
Plating / Coating:     Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape:  Flat / Plain / Glue-in / with no bore
Pot Magnet Size:
Pot Total Diameter (D):        6 mm
Pot Total Height (H):       4.7 mm
Tolerance:         ±0.1 mm
Holding Force:   0.5 kg
Weight: 2 g
Maximum Operation Temperature: 80 °C
Delivery Time:           7-15 days

Neodymium magnets of neodymium, iron, and boron (NdFeB) are the stronges of all permanent magnets. Flat pots are a special shape of neodymium magnets with extended holding forces. Please notice our safety precautions. Flat pots are magnets in a steel pot. The strength of magnetism is blocked at the pot side and concentrated at the magnet’s side – so flat pots all have tremendous holding force. We offer flat pots with neodymium magnets in seven different types – please take your choice: * A-type with a blind hole and countersunk * B-type with a blind hole and cylinder bore * C-type with a threaded stud * D-type with a screw thread * E-type with an open hook * F-type with a closed eyebolt * G-type with female thread inside. Tiny Neodymium Pot Flat Magnet D8mm

Diameter of flat pot magnet 6mm and 125mm
The diameter refers to the distance between the two widest points of the stud pot magnet. It ranges from 6mm (0.23″) to 125mm (4.9″). Small Neodymium Glued Pot Magnet D10mm
The diameter you choose will depend on where the stud pot magnet is going to be used.

For example, if the magnet is going to be used for promotional ceiling signs or light fittings, the diameter should be larger, as the magnet needs greater contact with the ferromagnetic material to provide a secure hold.

Neodymium magnets in steelpot, perfect to glue
Our strong neodymium magnets could be even stronger! In this category you find our neodymium pot magnets. The core is a strong neodymium disc built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron.

If you need less force and adherence you should have a look at our ferrite pot magnets.
Special feature: these magnets can not be fixed or mounted using screws. For this reason we suggest to place and glue them in a drilled pilot hole and can be used at a temperature up to 80 °C.